360 heads

[93toyota]

what are the 356 heads and what are their specs? :salut:

 

[Khyron]

http://www.autohobbydigest.com/tables.php?03_Head-Casting-Numbers

I don't see them on there, are you sure thats the numbers?

 

[OUTLAW]

went thru my list of heads and I cant find any 356 I do find 346 which are big blockheads 383/400/440 71-73 2.08 1.74

 

[93toyota]

I will check again. The 356 is on the top between thevalves.

 

[GotDart]

356 doesn't match anything in the Mopar engine book. The complete casting number is 7 digits long. Most people just refer to the last 3 digits. When you recheck your heads, give us all 7 digits.

 

[93toyota]

4448308? ale:

 

[duster340]

those are high swirl 360heads the best ones ever mopar smallblockheads pre magnum... should be 1.88intake valves and 1.60exhaustvalves and pretty small welldesigned chambers :salut:

 

[93toyota]

Thanks duster340. I don't seem to have a flowbench, would you perhaps know the chamber volume, intake and exhaust flow and maybe some valve train specs? :salut:

 

[AdamR]

and pretty small welldesigned chambers :salut:

I think only the 302s were closed chambers. the 308s were still open.

 

[duster340]

and pretty small welldesigned chambers :salut:

I think only the 302s were closed chambers. the 308s were still open.

ok i trust you adam better i may be wrong... was the other stuff any good?