360 Roller Cam Recommendations

[65deuce]

.030 Roller 360
Stock Crank and Rods
Sealed Power H116cp Slugs
9.8:1
2.02/1.60 308 heads
Comp 987-16 springs
904 tranny
Performer Air Gap
3.55-3.73 rear gear
Stall will be purchased after cam is decided.

I ordered a Comp XE286HR, but after debating amongst myself I called Summit back and told them to send the XE280HR. ](*,)
I'm looking for a decent lope but I' don't want idle quality or driveability to suffer (too much). I'd like to keep driving the car daily, maybe 10-20 miles a day max. What cam would suit the 2.02 valves better, it seems like the RPM range on the intake is closer to that of the 286. Anybody using either?
Let's have some opinions.

 

[Prine]

I cannot remember which specific cam I went with on my Roller SB.

I know it was a Comp Cams, split duration (somewhere around 280-284*) 220/230 @ .050"- .528" 110 or something real close, its been a few years.

It made my roller 318 wake right up.

I never dyno'd the setup, but would have guesstimated it to be around 320 whp.

You'll love it, don't fret.

 

[rumblefish360]

I like the smaller cam with the intended set up. Ethier gear ratio would be good.