bradr440
Active Member
360 block aligned honed mains with ARP studs, bored .030 over new cam bearings and freeze plugs.
Mopar 4340 forged 4" stroke crank, Eagle H beams with ARP 2000 bolts, and Icon forged pistons (IC745.030). It is balanced.
Also have a new Edelbrock Victor intake, SFI balancer and flex plate that go with it.
Was built to be around 10.5 to 1 with 60cc chamber.
I built this for the Trick Flow heads (60cc chamber) coming soon and a power adder. The rings are gapped accordingly for a power adder.
I have $3300 in receipts and that does NOT include what I paid for the block, crank, balancer, flex plate, and intake, which is well over $1000. I have 1 car and 3 engines, so this one needs to go.
Can be picked up in Mansfield or Columbus Ohio.
$3500. Reasonable offers considered
Mopar 4340 forged 4" stroke crank, Eagle H beams with ARP 2000 bolts, and Icon forged pistons (IC745.030). It is balanced.
Also have a new Edelbrock Victor intake, SFI balancer and flex plate that go with it.
Was built to be around 10.5 to 1 with 60cc chamber.
I built this for the Trick Flow heads (60cc chamber) coming soon and a power adder. The rings are gapped accordingly for a power adder.
I have $3300 in receipts and that does NOT include what I paid for the block, crank, balancer, flex plate, and intake, which is well over $1000. I have 1 car and 3 engines, so this one needs to go.
Can be picked up in Mansfield or Columbus Ohio.
$3500. Reasonable offers considered
