440-1 header flanges

[srixon4406]

Im in the process of starting the mock up of my boosted low deck big block swap in my valiant and im trying to source out a set a 1/2 thick header flanges for a set of 440-1 heads does anyone have a cad drawing of the header flanges or a basic drawing of set of flanges for these heads i could have turned into a cad drawing. Any and all help is always appreciated*
Thanks Aaron

 

[Matts440]

Spd exhaust has flanges you can buy

 

[boosted]

Just use a header gasket as you template..... Or go here..

http://www.fabshopheaders.com/categ...indy-cylinder-head-legend-header-flanges.html

 

[srixon4406]

I might have to use a gasket but was hoping someone may have a cad drawing ive found a shop that will make some 1/2 thick flanges of mild steel for 90 bucks a pair which is by far the best price ive seen for a set on the net.

 

[MidTexCuda]

Why 1/2"? If you are boosting I think your going to want stainless.

 

[bOb shingler]

trace the exhaust side of the head on a piece of paper like we use to trace stuff back in grade school.

 

[srixon4406]

I found these and thought i should post them

 

[bOb shingler]

that will work.