440 Turbo cam specs help

[mike1965]

I need some specs and where to buy a turbo cam for a 440 , I would like to make 600-800 hp on the street the turbo I have is a S400 80mm and an auto trans.

Thanks Mike

 

[HOTMOPR]

I have a custom comp cam. Its a solid roller cam with .650" lift. Its probably more than you need but you can email comp with what you want and they will design a cam for you. If I had to do it again I would have went with a Scott Brown cam. My cam just doesnt sound lumpy enough.. lol

Pretty sure this is where scott can be found..
http://www.buyracingparts.com/

 

[HOTMOPR]

BTW.. Bullet cams is another recommended grinder. Both Scott and bullet have a cam submission form you can fill out online. It would be worth it to see what they recommend for your build.

 

[rgreule]

Bullet is pretty good with specing turbo grinds.. you might want to look into the new 1.58 exhaust housing.. your gonna have a lot of back pressure.. I have the same turbo with over 100 less cubes..