64 dart 400&727

[freightdriver]

i am putting a 400&727 in the dart any one have pic on doing this or recamendations first time i put the tranny & block in there the tranny hump seamed mighty tight thanks . dave

 

[cavemanmoron]

i am putting a 400&727 in the dart any one have pic on doing this or recamendations first time i put the tranny & block in there the tranny hump seamed mighty tight thanks . dave

Tranny tunnel was not made for a 727 you will need to get a Big hammer and roll over the seam to start.

Exhaust can be a pain.

http://www.forabodiesonly.com/mopar/forumdisplay.php?f=79

http://www.bigblockdart.com/

http://www.bigblockdart.com/index.php?PHPSESSID=c0ca3b5ca8b36b41389d5fde1b90ac9d&board=5.0

 

[abodyjoe]

what are ya doing for headers? i went custom made for my 64 valiant.

 

[freightdriver]

i have a set of newer dart fenderwell headers that we will try first and then go from there. i am also from california in the central valley.

 

[az426hemi]

I don't know who's car this is but I would like to talk to him if anyone knows. This will give you an idea of one exhaust path.

Mike

 

[freightdriver]

nice blue car thanks is that a big block i did not think you could use exaust manifolds.

 

[az426hemi]

It is a 383.