64' Dart Rollcage Build: opinions wanted

[52fordF-3]

I've build acouple off-road Jeep rollcages, but this is my first for a car i'm planning to run at local dragstrip. I might try to get inspected/certified possibly. I've read the IHRA rules and think i'm pretty close, everything is just tacked together. I looking or opinions/changes or ideas......

I attached to sub-frame connectors to where i think is the best place. next i'm gonna do floor pans/truck floor etc.....

afew pics;

 

[805moparkid]

well the first thing i notice was how far forward u have the rear bars

they should be on top of the hump near the shock bolts...

the hoop looks good and so do the down bars...
how big are those plate?? 6x6 is what they need to be...

if you want i can get pics monday of how we do our SS hemi Darts

 

[green1]

Seems good enough, for NHRA. Mine:

 

[green1]

Just noticed, old pic, seat brace not in on mine. Talking to NHRA, they seem to really look at crossbar level with shoulder strap, or 4". And sidebar midway from shoulder to elbow. And that damned net.

 

[bOb shingler]

looks good but land the rear bars on the frame.