65 Dart from stock to 5 pin box to Unilite/MSD6

[Avispa]

My 65 Dart has the one year only through the firewall junction box, someone converted it to a 5 pin ECU and a two pole ballast and of course the non points dist.
I can wire the MSD and the unilite together, but do I need the ballast resistor?, if so how do wire it?, tie the run and crank wires to onside and the MSD to the other side? TIA

 

[Valkman]

I'm doing the same thing to my 65 Barracuda. If you use an MSD you need bypass everything and go directly to the coil and the distributor.

Tie the ballast leads together and you may need to change to a coil.