[WANTED] 66 ply VALIANT SIGNET SIDE TRIM MOLDINGS

[roger buetow]

i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger

 

[cudamark]

I still have a few moldings from one, but, I would like measurements and maybe a photo of the ones you need (or a photo of the opposite side).

 

[roger buetow]

The pass. side is 20 1/2 in. long and flared on the fwd. end for the wheel well opening, the driver side is 28 3/8 in long and flared on the aft end for the wheel well. I hope you have them waiting for your reply. THANKS Roger

 

[cudamark]

No, I'm afraid those have already been sold. Good Luck!

 

[roger buetow]

thanks Roger

 

[Darlene Spiegel]

i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger

Any Mopar part numbers??

 

[roger buetow]

Sorry I do not have any numbers only location and dimension

 

[Darlene Spiegel]

i am looking for two sections of side trim moldings on the rear quarters for my 66 ply valiant signet, on pass side from tail light to wheel well and on the driver side from wheel well to door. THANKS in advance for your help. Take care and have a great day. Roger

Going thru all my molding can’t find 66 but I will keep and eye out for u.

 

[roger buetow]

Thanks for the response Darlene I do appreciate it. Take care and have a great day roger

 

[DrAndrew]

Hard to find. I will keep an eye out also and I have some pics that may help.
i am looking for pics of what you need.

 

[roger buetow]

Thanks for your interest in my project, the trim items I need are for a 66 valiant signet on the pass side tail light to wheel well ( part no 2585114 ) and on the driver side rear fender well to door ( part no 2585873 ). I also need the rear windshield seal if you have or run across one. Big problem with the 66 signet to find do to small amount produced and one year only items. THANKS again for your interest and help. Roger B