[SOLD] 67 Dart Convertible

-
Status
Not open for further replies.
muddacres

muddacres

Well-Known Member
Joined
May 6, 2008
Messages
689
Reaction score
116
Location
Muddacres, New York
Rating - 100%
1   0   0
Contact seller
I bought this just for the door windows. I will sell the whole car or parts. It has lots of rust not that it couldn't be fixed but lots of work. It has no paperwork. I will start at $1500 and will accept offers. I will post a couple of pictures and if you want more let me know. It came with a new front left frame rail and fiberglass front fenders. Thank you FABO for the post.
Jim
20200801_150743.jpg
20200801_150820.jpg
20200801_150900.jpg
20200801_150924.jpg
20200801_150835.jpg

Sorry, I should have said this first, I would like to give this a few days to sell the whole car.
 
Last edited:
Price on all the rocker trim mounting brackets shipped to 80526

Also there are small acorn nuts on the screws on the top frame. Hard to see but they are visible from the inside of the back part of top frame, by where the 1/4 window rolls up to.

Also... There is a bracket from the front radiator support to the k member. I'm looking for the bracket and bolts and nuts, almost visible in the 2nd from last photo, centered under hood latch support

Might be interested in the dash bezel if the "TOP" label is in good shape.

And D O D G E hood letters

The more I look at the photos the more I see. Please post more photos!

Pm sent
 
Last edited:
If you don't sell the whole car, and go to hacking and packing.....post a pic of the top of the drivers side 1/4, where the pinch weld at the top is. The opening where the conv top trim covers it. If it's pretty clean, I may be interested in the top of the 1/4 from the door jamb back to the trunk gutter, and maybe the inner support piece for the conv top.
 
If the rear seat is not rotted out (the rear seat frame to my Barracuda is), I am interested. I am also interested in the aluminum strip on the top-back of the rear seat that the tonneau cover attaches to.

Would you mind PM’ing me with photos and prices?

Thanks,
Bob
 
Dana67Dart said:
Price on all the rocker trim mounting brackets shipped to 80526

Also there are small acorn nuts on the screws on the top frame. Hard to see but they are visible from the inside of the back part of top frame, by where the 1/4 window rolls up to.

Also... There is a bracket from the front radiator support to the k member. I'm looking for the bracket and bolts and nuts, almost visible in the 2nd from last photo, centered under hood latch support

Might be interested in the dash bezel if the "TOP" label is in good shape.

And D O D G E hood letters

The more I look at the photos the more I see. Please post more photos!

Pm sent
Click to expand...
Sorry, I should have said this first, I would like to give this a few days to sell the whole car.
Jim
 
No problem just want to stake my claim should you part it out.

Please post some more photos
 
JDMopar said:
If you don't sell the whole car, and go to hacking and packing.....post a pic of the top of the drivers side 1/4, where the pinch weld at the top is. The opening where the conv top trim covers it. If it's pretty clean, I may be interested in the top of the 1/4 from the door jamb back to the trunk gutter, and maybe the inner support piece for the conv top.
Click to expand...
If I do cut it up, I would like to sell convertible top parts altogether, which would include the rocker reinforcements.
 
Bobacuda said:
If the rear seat is not rotted out (the rear seat frame to my Barracuda is), I am interested. I am also interested in the aluminum strip on the top-back of the rear seat that the tonneau cover attaches to.

Would you mind PM’ing me with photos and prices?

Thanks,
Bob
Click to expand...
the back seat there is only the top, the bottom is missing. Are you looking for just the springs? I need to see if I have that strip for my car first. I will let you know tomorrow.
 
muddacres said:
the back seat there is only the top, the bottom is missing. Are you looking for just the springs? I need to see if I have that strip for my car first. I will let you know tomorrow.
Click to expand...
My top springs are fine. The bottom’s supporting frame (its bottom) is rotted to pieces and the rest is marginal.

However, I do need that piece that holds the tonneau cover to the seat.
Thanks,
Both
 
I want the hole car can you send me pic of hood where in new york I am in p.a thank you
 
Bobacuda said:
If the rear seat is not rotted out (the rear seat frame to my Barracuda is), I am interested. I am also interested in the aluminum strip on the top-back of the rear seat that the tonneau cover attaches to.

Would you mind PM’ing me with photos and prices?

Thanks,
Bob
Click to expand...
here are some pictures of that rear seat strip.
20200802_122740.jpg
20200802_122744.jpg
20200802_122749.jpg

There is a guy asking to buy the whole car. I will give him a day or so if he doesn't buy it. you are first inline
 
Dana67Dart said:
Price on all the rocker trim mounting brackets shipped to 80526

Also there are small acorn nuts on the screws on the top frame. Hard to see but they are visible from the inside of the back part of top frame, by where the 1/4 window rolls up to.

Also... There is a bracket from the front radiator support to the k member. I'm looking for the bracket and bolts and nuts, almost visible in the 2nd from last photo, centered under hood latch support

Might be interested in the dash bezel if the "TOP" label is in good shape.

And D O D G E hood letters

The more I look at the photos the more I see. Please post more photos!

Pm sent
Click to expand...
Here are some pictures. There are 11 clips I missed one in the picture. they are pretty rough.
20200802_121314.jpg
20200802_121321.jpg
20200802_131404.jpg
20200802_131412.jpg
20200802_131428.jpg
20200802_131648.jpg
20200802_131709.jpg
 
muddacres said:
I know this stuff is getting harder to find. I gave a lot more than I should of. Thinking 75.00 + 20.00 shipping included ins.
Click to expand...
Sound good. If he doesn’t take it all, or you decide to sell this strip, let me know.
Thanks
Bob
 
Last edited:
muddacres said:
Here are some pictures. There are 11 clips I missed one in the picture. they are pretty rough
Click to expand...

Did you find the achorn nuts on the top frame?

Assuming you don't sell the whole car,.

Get me a price for the parts I asked about.

As for dash, can't tell if the "TOP" label is dirty or damaged. Could you washer it with a bit of water to remove the grime, and take a closer up photo.

I could be interested in the entire dash cluster for the right price.

Are the loose fenders true 67 or some other year? Price?
 
Status
Not open for further replies.
-

Back
Top