68 barracuda chrome spear trim removal help

[68BBCuda]

Any advice on how to remove the chrome spear trim on the rocker? One side fell off after removing the front screw, but the other side still has clips holding it and I'm not sure how to remove without damaging.

Thanks Robert.

 

[jimharvard]

hey 68 bbcuda..

the long horizontal 1/2" chrome trim on the rockers should be attached with plastic "press on" trim holders under the chrome. you can pop the trim off by putting a screw driver under the end and prying the trim off of the plastic holders.

the "gill chrome" should be attached with 4 chrome phillips head screws running the length of the trim. removing these screws should allow you to pry off the trim.

people tend to modify parts on old barracudas so go slow and be careful removing your trim. those pieces are not easy to find.

hope this helps..