7.25 out of 65 barracuda questions.

-

autumn ash

Well-Known Member
Joined
Nov 13, 2022
Messages
80
Reaction score
17
Location
Texas
I just wanna slap new seals in it and possibly new bearings if it needs. Do the gears look ok? And i assume someone can tell me what all the castings mean?

20230715_131525.jpg


20230715_131534.jpg


20230715_131536.jpg


20230715_131540.jpg


20230715_131546.jpg


20230715_134359.jpg


20230715_134424.jpg


20230715_134433.jpg


20230715_134428.jpg


20230715_134424.jpg
 
2:93 gear ratio
Looks stock, original parts
Wear pattern on the pinion and gears looks normal

Any excessive play in the gears or bearings?
 
2:93 gear ratio
Looks stock, original parts
Wear pattern on the pinion and gears looks normal

Any excessive play in the gears or bearings?
Not that i noticed but i didnt look too hard yet. Just drained it this morning.
 
It looks fantastic! Service it, fill it up and run it!
 
It's amazing how these little cars can last. I serviced the 7.25 in Vixen a while back and she had very little wear and the wear pattern was perfect. She's 59 years old. These cars nowadays will never make that.
 

It's amazing how these little cars can last. I serviced the 7.25 in Vixen a while back and she had very little wear and the wear pattern was perfect. She's 59 years old. These cars nowadays will never make that.
I know right, working on new cars is the worst too, and its so often cause they break.
 
-
Back
Top