[FOR SALE] 71 340 Block, 3 J Heads, Forged Crank, set of rods

[gregpurcell]

I have a 71 340 .30 over block date code 6/17/71. The block vin is 2G11508. The top deck number is M340RJ0000225. (all pictured below). I have 3 J heads with 188 intake valves. I have the forged crank cut .20 on the mains .10 on the rods . I have a set of stock rods but no pistons.

I am told the motor was together and running but it was losing compression on the number 8 cylinder so it will probably have to go .40 (or you could sleeve #8). Someone broke an extractor in the exhaust port of one of the heads. You could probably run manifolds without that bolt but that's why there's a spare head. The crank is rusty from sitting so it will need turned more.

Located in Savannah, GA I CANNOT ship but I can deliver to Carlisle if I get a non refundable deposit. Asking $1050

Thanks for looking!

View attachment 1715340745

View attachment 1715340733

View attachment 1715340735

View attachment 1715340737

 

[RustyRatRod]

@crackedback

 

[RustyRatRod]

If you spray that crank with a good penetrating oil, it might be salvageable as is depending on how it mics. I've saved them worse than that. Just a little FWI.

 

[rlcbit]

Will you sell just the .030 pistons and rods

 

[Bigboy 68]

Will you sell just the block ??

 

[gregpurcell]

Will you sell just the .030 pistons and rods

$250 plus the ride for the 30 over pistons. Please PM me with an email address and I'll send individual piston pics.

 

[gregpurcell]

Will you sell just the block ??

$800 for just the block.

 

[rlcbit]

[email protected] for pictures

 

[gregpurcell]

pics sent on the rods/pistons

 

[gregpurcell]

Sale pending on rods/pistons. Rest of deal reduced to $1100

 

[gregpurcell]

sale pending on windage tray/oil pan

I have the block, 3 J heads (pics below), crank and one set of rods (without pistons)
$1050

 

[gregpurcell]

rods and pistons, windage tray & pan sold.
new price: block, 3 J heads, crank and rods with no pistons. $850 all