vntned
Well-Known Member
Contact seller
Gibsonville NC 27249
Clean rust free lower mile car!
318 A904 7.25''
engine has about 500miles on a complete rebuild
'71 318 with .030'' flat top pistons
rebuilt Jheads with new everything(valves, Comp lifters, springs etc.)
Comp 268H cam
stock 2bbl intake and carb
Petronics ignition
stock 318 exhaust manifolds
true dual exhaust
new carpet
14x6 Rallyes with new 205/70 BFG TAs on the front
rear tires need to be replaced due to dryrot
I drive it bidaily(I drive my '64 half the time) but..
it needs carb tuning, brake adjustment and an alignment.
Cosmeticly needs a new vinyl top and the interior needs the front seat recovered, a dashpad and headliner. Oh, and it also needs wiper arm seals.
My intention was to put on a Edlebrock 600 carb and AirGap intake, 360 manifolds, all of which I have laying around. Then redo the suspension with new everything. So far Ive spent over $1000 acquiring 4 new KYB shocks, PST 1.03'' torsion bars, Mancini XHD leaf springs and an Addco 1 1/8'' front sway bar kit.
Im asking $3500 for the Dart as is without all the extras, and $4500 with. Might be interested in trades.
Clean rust free lower mile car!
318 A904 7.25''
engine has about 500miles on a complete rebuild
'71 318 with .030'' flat top pistons
rebuilt Jheads with new everything(valves, Comp lifters, springs etc.)
Comp 268H cam
stock 2bbl intake and carb
Petronics ignition
stock 318 exhaust manifolds
true dual exhaust
new carpet
14x6 Rallyes with new 205/70 BFG TAs on the front
rear tires need to be replaced due to dryrot
I drive it bidaily(I drive my '64 half the time) but..
it needs carb tuning, brake adjustment and an alignment.
Cosmeticly needs a new vinyl top and the interior needs the front seat recovered, a dashpad and headliner. Oh, and it also needs wiper arm seals.
My intention was to put on a Edlebrock 600 carb and AirGap intake, 360 manifolds, all of which I have laying around. Then redo the suspension with new everything. So far Ive spent over $1000 acquiring 4 new KYB shocks, PST 1.03'' torsion bars, Mancini XHD leaf springs and an Addco 1 1/8'' front sway bar kit.
Im asking $3500 for the Dart as is without all the extras, and $4500 with. Might be interested in trades.