727 trans bushing part
- Thread starter bcuda1$3$
- Start date
-
Are you asking about the bronze bushing inside the hub ?
Tommy
Tommy
Okay,,,is it worn out or damaged in any way ?
Very rarely do most of those bushings wear in the 727 ,,,,unless it’s very high mileage and seen harsh service .
Tommy
Very rarely do most of those bushings wear in the 727 ,,,,unless it’s very high mileage and seen harsh service .
Tommy
Have you examined the pump rotors themselves,,,that’s much more critical .
Tommy
Tommy
Yes I am actually near the end of the rebuild and when I pushed this one bushing in I scratched it. Transports warehouse isn’t answering. I got the master rebuild so it was all in there but boogered this one.
Okay,,,I understand .
How bad is the scratch,,,,,is it damaged really badly,,,,or can it be smoothed out with a piece of Scotchbrite ?
If it’s only a scratch,,,,that won’t compromise the load capacity of the bushing .
Tommy
How bad is the scratch,,,,,is it damaged really badly,,,,or can it be smoothed out with a piece of Scotchbrite ?
If it’s only a scratch,,,,that won’t compromise the load capacity of the bushing .
Tommy
mopowers
Well-Known Member
-
