[WANTED] 727 v8 to 7 1/4 drive shaft
- Thread starter elvaliant66
- Start date
-
- Status
RedFish
Well-Known Member
- Joined
- Sep 5, 2007
- Messages
- 25,849
- Reaction score
- 5,355
You didn't state what wheel base/ car.
I wish you luck but I had to have a shaft made for that combo ( 67 B'cuda ). If my memory serves correct it was 49.5 from c <-> c of yokes. I sold it years ago. Buyer said it was correct for his needs to 8.75 rear. What I don't recall is his trans, 904 or 4 speed. Anyway... another more popular application explained why I couldn't find one available. Again, Good luck.
I wish you luck but I had to have a shaft made for that combo ( 67 B'cuda ). If my memory serves correct it was 49.5 from c <-> c of yokes. I sold it years ago. Buyer said it was correct for his needs to 8.75 rear. What I don't recall is his trans, 904 or 4 speed. Anyway... another more popular application explained why I couldn't find one available. Again, Good luck.
I just did one for an se with the 111 wheelbase and a 8 1/4 48" cl/cl of the joints. 249 shipped
elvaliant66
Well-Known Member
It's for a 72 valiant
2manymopars
AKA mopar_daddy
Slide a yoke in trans and measure, your combo is not common. I probably have the one you need as i told Moe.
elvaliant66
Well-Known Member
Alright I'll follow up on that and let Moe know
- Status
-
