'73-76 brake porp/valve needed badly

[gerty]

Does anyone have one of these porportioning valves? Here is a picture of the one I need.
Bob

 

[nicoles]

You can take that apart and clear the inside out with brake fluid check the spring ,and still use it . I have done this before till I could find a newer one there is only one set of plungers in there.

 

[lead69]

I may have one,I will check and let you know.

 

[gerty]

You can take that apart and clear the inside out with brake fluid check the spring ,and still use it . I have done this before till I could find a newer one there is only one set of plungers in there.

This one is not mine, I just borrowed the photo from another website. My car had drum brakes and also 2 of the brake lines snapped off flush when i removed them.
Bob

 

[physixx]

I have one from my 71 340 Demon if that would work.

Ken
Edison, NJ
[email protected]

 

[ted_sweet]

http://www.mpbrakes.com/uploads/products/vl3359_large.jpg

http://www.mpbrakes.com/products/product-detail.cfm?product_id=613

 

[gerty]

Ken, I think that one is for drum brakes. If I hadn't already bought new repo lines, I probably could use an adjustable valve on the rear brakes with a prop valve for drums. Thanks for the offer, what do you have to have for it?

Ted, thanks for link.

 

[physixx]

You're right, the valve is from my drum brake car. I would like to get $20 shipped.

Ken

 

[aa-1159]

if you can't find one, you can still buy these at NAPA

 

[gerty]

You're right, the valve is from my drum brake car. I would like to get $20 shipped.

Ken

Ken I sent you a pm.
Bob