[WANTED] 73 and up a-body upper control arms and disc spindles

[Landons65Dart]

Need some upper control arms and disc spindles off a 73 or later a-body.

 

[dbeeeer]

I used the complete k member from a 75 dart with the disc brakes and bolted it in to my 70 dart, had a set of axles from a c body resplined at mosers, had mosers recut a b body rear end housing for a a body , and the bolt pattern was then 5x4.5 inches. works good with a 440

 

[65 Dartman]

I used the complete k member from a 75 dart with the disc brakes and bolted it in to my 70 dart,

Too bad the 73-76 K frame (or for that matter the 67-72 K) won't work with an early A - too wide.

 

[dbeeeer]

I tried, I know something new now!!!!

 

[2manymopars]

I have a complete set up in So Cal.

 

[Landons65Dart]

I have a complete set up in So Cal.

Disc setup? How much will you take for it?