[SOLD] 741 3.23 Center Section

-
Status
Not open for further replies.
H

hunt2elk

Well-Known Member
Joined
May 19, 2010
Messages
486
Reaction score
212
Location
WI
Rating - 100%
30   0   0
Contact seller
Original 741 center chunk that I just removed from my 1970 Duster. 3.23 cone sure grip and 7260 10 spline yoke. Ring & pinion are perfectly quite as are the bearings. The sure grip works fine, but just started making some clunking noises. So that portion needs to be machined down and rebuilt, or just replaced. Would prefer local pickup, but would ship at the buyers expense. It weighs 75.5 pounds in a 5 gallon pail. I am located 100 miles straight east of the Twin Cities of MN in north central WI. $200. plus shipping if paying by friends and family, or add 4% to the total if you don't feel comfortable with that.

20180705_083607.jpg


20180705_083613.jpg


20180705_083632.jpg


20180705_083638.jpg


20180705_083650.jpg


20180705_083707.jpg


20180705_083714.jpg
 
Last edited:
Ended up getting this ready to ship for a member, but haven't received payment, so it is still for sale. The total package weighs 80lbs. Found that UPS is the cheapest for shipping. Prices I have got so far with $200. insurance are WI to WA $92.16, WI to FL $68.66, and WI to MN $64.31.
Also to clarify, the sure grip works fine and both wheels lockup. It started making a small clunking noise when moving slowly in the driveway when turning one direction but not the other. Makes no noise going down the road. So I am assuming it is starting to fail. On the bench everything moves freely, smooth, and quite. Ring, pinion, and bearings look great. Center pin between the axles is included also. I pulled it so as not to do any damage to it and replaced it with a 742 clutch style I had.
Send me a pm with your zip and I will get you a shipping quote.
 
Last edited:
hunt2elk said:
Ended up getting this ready to ship for a member, but haven't received payment, so it is still for sale. The total package weighs 80lbs. Found that UPS is the cheapest for shipping. Prices I have got so far with $200. insurance are WI to WA $92.16, WI to FL $68.66, and WI to MN $64.31.
Also to clarify, the sure grip works fine and both wheels lockup. It started making a small clunking noise when moving slowly in the driveway when turning one direction but not the other. Makes no noise going down the road. So I am assuming it is starting to fail. On the bench everything moves freely, smooth, and quite. Ring, pinion, and bearings look great. Center pin between the axles is included also. I pulled it so as not to do any damage to it and replaced it with a 742 clutch style I had.
Send me a pm with your zip and I will get you a shipping quote.
Click to expand...
replied back to sent pm..
 
Status
Not open for further replies.
-

Back
Top