[SOLD] 8 3/4 stainless brake lines

[physixx]

Sale Pending on the new set of brake lines.

I have for sale 2 sets of stainless 8 ¾ brake lines. One set appears to be a new set and the other looks like it was installed on a rear at some point and looks like it’s in excellent shape except for a groove cut into the line from a cutoff wheel. It can very easily be repaired with a coupler. I would like to get $25 for the new set and $20 for the used set.

Ken
Edison, NJ

 

[mycuda]

Ill take new set to 60021

Thanks ken PM me with ship $

 

[physixx]

PM sent

 

[340man]

What years are the stainless steel brake lines fit 67-69 or 70-74 A-body??

 

[physixx]

The 66-72 A-body 8 3/4 housings are the same width. Not sure about the later 8 1/4 ones though. These brake lines were for the 8 3/4 housings.

 

[340man]

The 66-72 A-body 8 3/4 housings are the same width. Not sure about the later 8 1/4 ones though. These brake lines were for the 8 3/4 housings.

Yes they are the same length but wear the vent tube is located at is the difference. 67-69 is located closer to the top housing, 70-74 closer to backing plates(middle). So the difference is the length to the back on the left side of the backing plate.

 

[physixx]

If you can PM me the lengths that you need, I'll check lines.