92 5.2 swap in 65 Dart/vert PS delete question

[mycuda]

Keeping serpentine pulley setup and brackets. Cut off part of bracket that holds PS.
Thinking of moving idler and belt tensioner pulleys to the now void area on driver side to even out belt setup in front of engine. Think it'll look like /6 if I don't.lol

Has anybody done this or something similar?

Thanks,Dave.

 

[dragbaron]

My next magnum EFI swap is going to be a '71 D100. It is manual steering, and this is what I've been thinking about doing.

I just added a grooved pulley off another old tensioner I had laying around. It's real close to the water pump where the heater hose pipe goes in, but it does miss it. I planned on just removing some material from that area for more clearance. It hasn't been tested yet, but it's an idea.

 

[mycuda]

Nice.
Forgot to mention don't have air.
But same concept. Was thinking on using
Another idler or fab something with
PS pulley.

Thanks, Dave

 

[dragbaron]

No A/C and power steering? Then this is an idea.

Air Conditioning/PS delete solution

 

[mycuda]

I guess Its not an idea anymore, Just gotta make a bracket with/from PS aluminum housing.

Thanks, Dave