Darrell Keith
Well-Known Member
Just pulled apart my axles. 8.75 and the bearings are sealed bearings with a SE8704SX number on them. Can't find that number or cross reference.
A body sealed axle bearing
- Thread starter Darrell Keith
- Start date
-
Contact Doctor diff. He has a web site and is good with all things 8-3/4”
I believe Cass?!? is the one who will answer the phone. Excuse my memory,… what’s this conversation about again? lol!
I believe Cass?!? is the one who will answer the phone. Excuse my memory,… what’s this conversation about again? lol!
Your car was probably converted to "green bearings". It's pretty common, but it's not an OE deal so you probably won't find a cross reference to whatever car it is you've got.
This is likely what you've got in there, or at least a version of it
Mopar Green Bearings for 8 3/4" (8.75) and Dana 60
If you can measure the ID/OD of the bearings it will help, just in case something else has been done regarding the axles/housing. Not likely but stranger things have happened. Cass @DoctorDiff is the expert and should be able to help you figure out what you've got.
This is likely what you've got in there, or at least a version of it
Mopar Green Bearings for 8 3/4" (8.75) and Dana 60
If you can measure the ID/OD of the bearings it will help, just in case something else has been done regarding the axles/housing. Not likely but stranger things have happened. Cass @DoctorDiff is the expert and should be able to help you figure out what you've got.
Yep,,,,Cass at DrDiff .
Tommy
Tommy
Dr diff said he would rather be emailed than called when I contacted him last.
Darrell Keith
Well-Known Member
Thanks guys. Got on the web site and ordered the bearing kit
-
