a998 or a999

[dodge71demon]

I'm trying to identify which automatic I have the numbers on the rail as best I can read is PK4202675X75035130 trying to figure if it's a 998 or 999 on the attached picture mine looks like this which i found at this link HELP

http://forums.moparmusclemagazine.com/70/8301171/general-mopar-discussion/904-trans/index.html

 

[70aarcuda]

http://www.mymopar.com/downloads/transguide.pdf

 

[dodge71demon]

http://www.mymopar.com/downloads/transguide.pdf

Been there done that even tried running the number different ways on that site all it says it is an A904 which could be A998 or A999 it's on a 318 which leads me to believe it's an A998 if I go by the picture it's an A999 I was told it came out of some sort of 84 Dodge car confused

 

[70aarcuda]

the only really way to tell is to tear the trans apart.........

 

[dodge71demon]

the only really way to tell is to tear the trans apart.........

not good with automatics then all I would is a bunch of piecies

 

[dodge71demon]

???????????????

 

[fishy68]

I'm trying to identify which automatic I have the numbers on the rail as best I can read is PK4202675X75035130 trying to figure if it's a 998 or 999 on the attached picture mine looks like this which i found at this link HELP

http://forums.moparmusclemagazine.com/70/8301171/general-mopar-discussion/904-trans/index.html

Like Tony said the only way to know for sure is to tear it apart.

BTW: All have 3 test ports like in the picture so that part of identification is null and void. Can't comment on the ribs.

 

[dodge71demon]

Like Tony said the only way to know for sure is to tear it apart.

BTW: All have 3 test ports like in the picture so that part of identification is null and void. Can't comment on the ribs.

Always learning on every project that's a good thing

 

[fishy68]

Always learning on every project that's a good thing

That's the way it always is. So much of this stuff doesn't have a good way to identify it that it's a challenge every time.