Accelerator pedal adjustment-new manifold

[rtee007]

I have traded the Mopar M1 Single Plane for an RPM Air Gap.

The accel pedal has too much slack when I adjust the carb at WOT.

 

[rtee007]

Pic of pedal end, the spring clip in now correctly positioned

 

[Matts440]

What about spacing up the rear clamp on the manifold to take up some slack.

 

[TrailBeast]

Is it just me or does it look like if the metal part of the cable housing at the carb end was in the cable clamp on the intake there wouldn't be any slack?

 

[teringer]

the metal end should be under the clamp try to readjust.

 

[rtee007]

OK, will try that

 

[AJ/FormS]

You have that messed up. I will bet you are using the 2bbl bracket. TB hit it right on. The AG puts the carb way up there. You can buy a very nice adjustable aftermarket bracket, or re-engineer yours.Either way, the metal part has to go into the clamp, or risk WOT sticks-on; Not a pleasant event, I can assure you.
I, for one, am so glad you asked.Your loved ones would hate to see your name in the obits.

 

[rtee007]

Any suggestions on an aftermarket bracket for the Air Gap?

You have that messed up. I will bet you are using the 2bbl bracket. TB hit it right on. The AG puts the carb way up there. You can buy a very nice adjustable aftermarket bracket, or re-engineer yours.Either way, the metal part has to go into the clamp, or risk WOT sticks-on; Not a pleasant event, I can assure you.
I, for one, am so glad you asked.Your loved ones would hate to see your name in the obits.

 

[rigger3006]

richard ehrenberg sells a nice setup on ebay

 

[famous bob]

richard ehrenberg sells a nice setup on ebay

looks to me like you could use a shorter cable.