Aftermarket trans cooling lines, do they fit?

-
trebor75

trebor75

Well-Known Member
Joined
Sep 12, 2009
Messages
981
Reaction score
452
Location
Sweden
I'm swapping from a slant six to a 273/727 smallblock in my 1970 duster. I need to either fabricate some oil cooler lines or by some aftermarkets ones like the ones in the picture. They are suposed to fit: 69-72 All A Body 727

Anyone tried them? Do they fit? I have cheapo headers that hang low.


lines.jpg
 
Oooh I need some of those too! My new Dart project was missing them and it has headers as well. I hope some people chime in......I have a 904. What's the price on those?
 
the ones i bought from mancini a couple years ago didnt fit worth a ****. i had to modify them to make them work. they were way to long. i did a lot of swearing before i was done.
 
Depends on the vendor. Those tubes go through right up next to the engine so headers should not be a problem. Snaking them in from the front through every thing, now that is fun! Inline Tubes, Fine Line, and Classic Tubes stuff usually fits. Just make sure that they know exactly what you are doing and what the parts combination is that you have in the car.
 
Long time since I posted this topic but I just wanted to say thet the lines on the picture was a really good fit with my setup. If it can help any other!
 
You must log in or register to reply here.
-

Back
Top