[WANTED] Any year 426 HEMI

[mopar373]

Looking for a basically stock 426. Over boar or small cam OK, but as complete as possible. Race or street type HEMI OK.

 

[70DartMike]

Here's one bored .020 over.

http://phoenix.craigslist.org/wvl/pts/4898669012.html

 

[my5thmopar]

here is another. Better have deep pockets!!! http://nashville.craigslist.org/cto/4940806642.html

 

[70DartMike]

here is another. Better have deep pockets!!! http://nashville.craigslist.org/cto/4940806642.html

That isn't a Hemi, notice the valve covers. Still a desirable engine though.

 

[RustyRatRod]

here is another. Better have deep pockets!!! http://nashville.craigslist.org/cto/4940806642.html

A Hemi that is not.

 

[dwire67]

http://www.bpeusa.com/P5249667AC.asp

Can't bet the price $14,500 for 426 Crate engine

 

[my5thmopar]

That isn't a Hemi, notice the valve covers. Still a desirable engine though.

Didn't even notice, I had 426 tunnel vision. I've seen that engine on CL a few times thinking..... that would be a cool engine for my 64 D100. Bump to the OP.

 

[sscuda]

Looking for a basically stock 426. Over boar or small cam OK, but as complete as possible. Race or street type HEMI OK.

If you want new try the reputable Hemi builders. I emphasize the word "reputable". There are about 6 reputable Hemi builders in North America. FHO, Ray Barton, Sheppard, Wescott, the guy on the west coast, and Muscle Motors being the top 6 and in this order too.

If you are willing to accept a used Hemi motor then try racingjunk, moparts, or classracer. Be careful because there are a few sellers on these sites who are less than honest. If you find one you like have it inspected by a knowledgeable Hemi engine builder if you can.

Good Luck with your quest.

:glasses7: