Anyone have any alignment specs for a '71 Dart with a small block?

[LXguy]

Hey All:

Getting this car aligned tomorrow. Don't have any specs, or know anything about aligning these cars at all.

Any help appreciated.

Steve

 

[demon seed]

These are the numbers I had my front end guy shoot for, works fine.
http://www.moparts.org/Tech/Archive/susp/26.html

Terry

 

[68barracudaconv]

I'm more like too late, but most modern alignment equipment has specs back to 1950s. I had my 68 barracuda aligned and the computer on the machine had the specs and the job was done routinely. good luck.

 

[abodyjoe]

If you are running radial tires you may as well trash the stock specs. Car tends to wander. You need to find a guy that does more then just move things till they see green on the screen. Check out the latest issue of mopar enthusiasts. It has a good article on front ends and it touches alignments. You really need to find a guy that knows and understands what he is doing on an alignment machine.

 

[abodyjoe]

you can read it online for free. just need an e-mail address.


the sections in purple are what you need to read.

http://editions.amospublishing.com/MPRE/docs/20091101/images/146/20091101_0041.page


http://editions.amospublishing.com/MPRE/docs/20091101/images/56/20091101_0044.page


the entire article is here. http://editions.amospublishing.com/MPRE/default.aspx?d=20091101

 

[br.sterkens]

you are so right iv have been to 5 shops and bad luck. i have to bring it back home and fix it so it will not eat my tire ups and drive str8. (Abodyjoe)