Brian Hafliger
Well-Known Member
I've got a set of Batten W2 heads in my shop I'm going to sell.
They are 2.08x1.60, have flow sheet. I don't know who did the porting, but I touched the seats up and replaced 1 ex. guide that was leaking.
They flowed 302cfm at .600 lift, and are oval port. I've heli-coiled one intake bolt hole, the rest are good.
I also welded the open side of the chamber closed and the chambers are now 58cc but they could be opened up for more volume and better intake flow.
I can sell them bare, or I have new Ferrea 6000 series valves for them, and I also have different spring setups that I could assemble them with.
Email for pricing. Thanks!!
Brian
They are 2.08x1.60, have flow sheet. I don't know who did the porting, but I touched the seats up and replaced 1 ex. guide that was leaking.
They flowed 302cfm at .600 lift, and are oval port. I've heli-coiled one intake bolt hole, the rest are good.
I also welded the open side of the chamber closed and the chambers are now 58cc but they could be opened up for more volume and better intake flow.
I can sell them bare, or I have new Ferrea 6000 series valves for them, and I also have different spring setups that I could assemble them with.
Email for pricing. Thanks!!
Brian
