big block dart project

[rah64dart]

looking for advise on the best bigblock rotating assy. 543 C I ? looking for about 800 H P

 

[younggun2.0]

looking for advise on the best bigblock rotating assy. 543 C I ? looking for about 800 H P

my advice........

start saving your money now.

 

[moparlover]

there are a few vendors on this site that can set you up

ou812 / brian at imm http://www.immengines.com/
or mike at MRL http://www.forabodiesonly.com/mopar/forumdisplay.php?f=107

they would give you expert advice, and would be highly recommended by anybody on this site

 

[rah64dart]

thanks mopar lover and yes I'm saving my pennies younggun 2.0 but if you would like to donate..........

 

[younggun2.0]

thanks mopar lover and yes I'm saving my pennies younggun 2.0 but if you would like to donate..........

thats bout all i got is pennies. lol keep us posted with the build plans. sounds like a monster.

 

[OldmanRick]

This is so far out of my league it's not funny.....But if you're building your own, besides 440 Source, it wouldn't hurt to nose around here also...

http://www.musclemotorsracing.com/stroker-category/440-stroker-kit-article.html


Keep us informed on what you eventually choose. It will be interesting on the cost benefit with the 4.5" stroke, considering all the extra short block prep involved vs a 500" assembly with a good pair of heads and matching valvetrain.