[SOLD] Big Block Mopar Erson Roller Rockers - New

-
Status
Not open for further replies.
R

Rocket

FABO Gold Member
FABO Gold Member
Joined
Apr 22, 2005
Messages
2,997
Reaction score
962
Location
CT
Rating - 100%
145   0   0
Contact seller
I have a new set of 16 new Erson big block Mopar roller lifters in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. These rockers use an 11/16” hardened shaft that also oil the rockers through the head pedestal. They are not designed for pushrod oiling. Note I do not have the shafts for these rocker arms.

These rocker arms are very difficult to find. Price is $480 for the 16 rocker arms shipped in the lower 48 states. I will ship internationally for the extra shipping cost.

PM me with any questions or for more pictures.

Erson 1.JPG


Erson 2.JPG


Erson 3.JPG


Erson 4.JPG


Erson 5.JPG


Erson 6.JPG


Erson 7.JPG


Erson 8.JPG
 
Last edited:
No I do not have the shafts. Rockers only as pictured. Posting updated to make that more clear.
 
11/16” for these rocker arms. They are a unique design.
 
So do these mount as a pair? As in the shaft is 7/8s in the middle to mount to the head and 11/16s on each end to fit the rocker. What am I missing. Kim
 
One single 11/16" shaft. Shaft came with a 5 collars that slide on the shafts where the pedestals are to make up the difference to sit on the saddles. Spacers place the rockers in the right spot.
Some pictures of a small block setup by Erson. Same design and shaft size.

P1040524.JPG


P1040531.JPG


P1040533.JPG


P1040535.JPG


P1040536.JPG
 
Status
Not open for further replies.
-

Back
Top