[FOR SALE] Big Block Spool Mounts

[mopars4life]

I have a set of big block spool mounts. These were with my 73 duster that had a big block in it. Going back to small block so I won't be using them. The inserts I would probably replace but they could be used for a driver. $45 plus the ride.

 

[mopars4life]

Still available

 

[SMCARNUT]

Do you have a big block K member?

 

[mopars4life]

Do you have a big block K member?

Sorry I don’t. Only have the mounts

 

[str12-340]

So are these mounts to put a big block motor on a small block k-frame?

 

[mopars4life]

So are these mounts to put a big block motor on a small block k-frame?

Yes 73 and up spool mount k frame. The duster I have had a 440 in it. You should be able to search on this swap to verify on the forum.

 

[oldkimmer]

Those are the factory dodge mounts. They will only work if u move the mounts on the 73 up K member the appropriate amount. Do a search Jim Lusk has a video on how to accomplish this task. Kim.

 

[oldkimmer]

Ok, I’ll clarify more. If u look at the mount on the right u can see that the insert is not centered as in the left mount. They made these kinda work with out moving the mounts on the K frame. This moves the motor and tranny approximately 3/4 of an inch ahead. Also then the oil pump is almost rubbing on the drivers mount. Many have been put in like this. Clearance to the rad gets pretty close. Kim

 

[mopars4life]

Thank you oldkimmer for helping him with this info.

 

[oldkimmer]

No problem. I just didn’t want him thinking these water conversion mounts. Kim