Bucket Seat Track

Mopar Interiors

  1. bob7four

    bob7four Well-Known Member

    Messages:
    112
    Likes Received:
    18
    Joined:
    Feb 8, 2016
    Location:
    New Jersey
    Local Time:
    3:09 AM
    Ok guys I have searched everywhere and cannot find anybody that fabricates seat tracks for a 69 Barracuda. I have one rusted out track that I don't think can be repaired. Any ideas?
     
  2. 44067gtdart

    44067gtdart Well-Known Member

    Messages:
    193
    Likes Received:
    50
    Joined:
    May 22, 2014
    Location:
    Nevada
    Local Time:
    2:09 AM
    Not positive but possibly Mopar Plus?
     
  3. 512Stroker

    512Stroker We are all here because we are not all there.

    Messages:
    1,968
    Likes Received:
    1400
    Joined:
    May 30, 2016
    Location:
    Freedom, MO
    Local Time:
    2:09 AM
    Place a WANTED ad here on FABO
    There are no reproductions available
     
    • Agree Agree x 2
    • Joey4speed

      Joey4speed FABO Gold Member FABO Gold Member

      Messages:
      1,148
      Likes Received:
      864
      Joined:
      Jul 17, 2018
      Location:
      Jersey
      Local Time:
      3:09 AM
      Signing on.
      Also, would anyone have a contact on refurbishing seat tracks, if we can find used ones?
       
    • hwd2

      hwd2 Well-Known Member

      Messages:
      111
      Likes Received:
      43
      Joined:
      Feb 22, 2016
      Location:
      Kamloops BC - Canada
      Local Time:
      12:09 AM
      Hopefully nobody sells (you or me) damaged goods. Most a person should have to do is to work in plenty of lithium type grease into the sliding mechanism, inspect and lube cables and coil springs and of course the threaded studs that attach thru the floor. Clamp stationary part of each bracket in vise, etc., and work moving part back and forth. Note that the outside brackets (with adjust lever) are spring-loaded so be mindful of extra effort to extend those pieces. Sometimes the moving ball bearing partially embeds itself into the stationary bracket part but I've never had to refurbish or do anything major to any of my brackets over the past 50 years. Now, rust can be a different story.
       
    • Joey4speed

      Joey4speed FABO Gold Member FABO Gold Member

      Messages:
      1,148
      Likes Received:
      864
      Joined:
      Jul 17, 2018
      Location:
      Jersey
      Local Time:
      3:09 AM
      Yes, supposing they're rusted, realize the process, but would like to find a place to send them. Looking for that "new" look.
      Thats all.
      Thanks
       
    • toolmanmike

      toolmanmike FABO MODERATOR Staff Member FABO Gold Member

      Messages:
      55,975
      Likes Received:
      42271
      Joined:
      Jan 18, 2006
      Location:
      Iowa
      Local Time:
      2:09 AM
      I see quite a few tracks sold here. I would just start a wanted thread to find what you need.
       
      • Agree Agree x 1
      • bob7four

        bob7four Well-Known Member

        Messages:
        112
        Likes Received:
        18
        Joined:
        Feb 8, 2016
        Location:
        New Jersey
        Local Time:
        3:09 AM
        I posted a want ad weeks ago without any replies to date. Guess I have to wait it out or try to Fab a patch section where it is rusted out. Going to be difficult with all the bumps and depressions the original had fabricated into it.
         
        • Agree Agree x 2
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.