Cam ID Help

-

chewy

Some old guy...
FABO Gold Member
Joined
Dec 26, 2007
Messages
763
Reaction score
294
Location
North Las Vegas NV
I am looking for help for a cam I just took out of the original engine in my 65 Dart. The Original owner had replaced the cam at some point. So it could have been ground for any small block.

The rear of the cam is stamped with SPD14 and J127, the only other markings on the Cam are casting marks.

Inside the rear journal 13 on one side, 16 on the other. Inside the distributor Gear Ring, V64 on one side, 15 on the other.

The 6's might be 8's they are a little difficult to be sure they are 6's.


Any help with this greatly appreciated.

--Tom
 
With the help of Jim at Racer Brown, I at least know it is a Melling Cam. Anyone have an old Melling book with the Cam Spec's?
 
-
Back
Top