Cam Identification??

[moparsegura]

I have a purple shaft I pulled out of a motor, I built the motor about 5 years ago and only run it a couple months before pulling it back out and bagging it up. Now I am going to use the block for a 408-rebuild but keeping all the old/new stuff in it for a later project. My problem is I dont have the the cam card or remember what I even put in it. Do any of you guys know how to identify what it is? I have heard about the paint chart but can't seem to find it anywhere and the numbers on the cam don't seem to mean anything.

 

[moparsegura]

???????

 

[venomvpr900]

Is there a part number on the cam? post up the numbers you have on the cam

 

[fishy68]

Don't know of any paint chart to go by but how about taking a micrometer and measuring the lobe lift and comparing it to what mopar has listed. That's how I always do it. Also remember to multiply the cam lift by 1.5 to get the advertised lift.