Can the magnum SBM guys use these?

[greymouser7]

Comp Cams 4500-16

3/8" HIGH ENERGY STUDS

Or is this just a Chevy small block part?

 

[12many]

Those look like 7/16" base studs, likely won't leave much meat on the heads pedestals once enlarged. Comp has 5/16" base studs for the Magnum heads (which also fit some Oldsmobile heads) or you could go with 3/8" base studs. Both will accept 3/8" stud mounted rockers

 

[greymouser7]

Those look like 7/16" base studs, likely won't leave much meat on the heads pedestals once enlarged. Comp has 5/16" base studs for the Magnum heads (which also fit some Oldsmobile heads) or you could go with 3/8" base studs. Both will accept 3/8" stud mounted rockers

Brother I don't care what they look like, THEY ARE 3/8" Studs.

My description says so, the box says so (see pics).

 

[12many]

For the love of god, look up the part number they are 7/16" base , the ******* short end! as screwed into the head, they accept 3/8" rocker arms.....that would be the long end!!! Yeah, they'll work, drill out and tap your heads, put some triple springs on em and rev the *****

 

[rumblefish360]

Yeah, they'll work, drill out and tap your heads, put some triple springs on em and rev the *****

 

[IQ52]

If they are the proper length for your rockers and valve stems they could be used on the Indy LAX or MAX heads.