[WANTED] Car bellhousing for A833 OD / slant 6

[CMKirk]

Looking for a car (NOT truck) bellhousing to mount an A833 OD transmission to a slant 6 in a '65 Dart. Bearing retainer opening will be about 5 1/8", and it will have a tab mount for the clutch fork, NOT a ball mount. I was told that the casting number is 3743643.

 

[cudamark]

I'm pretty sure all the '75-up slant 6 bell housings are the ball type. Also, the pickup and van use the same bell housing if they have the 10" clutch. You'll most likely have to modify the Z bar bracket on the bell housing to get it to line up with the one on the '65 frame rail.

 

[ike61]

Howdy. Are you still looking?

 

[446acuda.2]

I'm pretty sure all the '75-up slant 6 bell housings are the ball type. Also, the pickup and van use the same bell housing if they have the 10" clutch. You'll most likely have to modify the Z bar bracket on the bell housing to get it to line up with the one on the '65 frame rail.

Brewers shows the 76-80 using blade type pivots