http://www.shophemi.com/p-203-new-hemi-chipkillr.aspx
anybody use or seen this in real life? just ran across it. looks pretty sweet.
anybody use or seen this in real life? just ran across it. looks pretty sweet.
carb on gen 3 hemi
- Thread starter shredxcam
- Start date
-
joeboy
Well-Known Member
It has come up before, and as far as I know nobody has one, strictly due to cost. $2600?!!! Thats more expensive than keeping the EFI.
You can run a stand alone ECU for the coils only from MSD or FAST for $500-700, and still rock a carb if you desire... This does require some tuning and skill, but factory tables are easy to copy, and this also allows for more exact tuning of the spark for the HEMI, mine gets more timing at peak torque with my EFI, then drops, and ramps up again... cant do that with a dizzy...
You can run a stand alone ECU for the coils only from MSD or FAST for $500-700, and still rock a carb if you desire... This does require some tuning and skill, but factory tables are easy to copy, and this also allows for more exact tuning of the spark for the HEMI, mine gets more timing at peak torque with my EFI, then drops, and ramps up again... cant do that with a dizzy...
cnddodgehead
Well-Known Member
interesting . but why would you go to a single plug per cylinder?
spend the extra $7000 and buy a crate g2 hemi !
spend the extra $7000 and buy a crate g2 hemi !
-
