Centerforce suggestions

-
71duster06

71duster06

Well-Known Member
Joined
Jan 23, 2008
Messages
639
Reaction score
76
Location
West Michigan (GR)
I was looking at the Centerforce II pressure plate for my 71' Duster 340. I already have a brand new disc but the pressure plate is bad. What all do I need and what exact pressure plate did you guys go with. I was looking at the CTF-CFT361739 from Summit. Alos do I need their throughout bearing as well? What else is needed?
 
I bought the C.F dual friction clutch and pressure plate kit,they recommend removing the overcenter spring(your decision wether to or not)also you don,t need a C.F throwout bearing.You can use stock.
 
I have the Centerforce II set-up and it rocks, shifts like a new car!! Works great on the street and drag strip. You may want to run the Centerforce disc too, sucks you have a new disc but it may work better this way, plus, you will have to pull it out anyway. I am also running the Centerforce throwout bearing, not sure if you have to or not with their pressure plate.
 
Also, my disc is a brand new Hayes. I assume that it should work fine with whatever pressure plate. I cant imagine that dimension wise there too much different from the Centerforce disc.
 
Myself,I would get the C.F disc also.That way you not mix-matching your stuff.My 2 cents.Do it once and you,ll be happy!
 
You must log in or register to reply here.
-

Back
Top