Convertible Back seat

-
1967 GT Vert

1967 GT Vert

Active Member
Joined
Jun 19, 2016
Messages
44
Reaction score
28
Location
Long Island, NY
Does anyone gave pics of the proper placement of hog rings on the back and sides and the mounting strip for the top cover? Preferably one out of the car. Couldn't find any on the web I circled the areas in red in the pics. Claims the strip was mounted in original screw holes but I dont see it as right.

Just had the seats and foam redone and did not take pics of before and the shop obviously didnt either, plus he has some trainees The shop is going to make good as this was not inexpensive here in NY.

Thanks

Thanks

20190505_121829.jpg


20190505_121850.jpg
 
My top is down so I cant see the hog rings but my mounting strip sets just under the stiching. Closer to your second photo, but even closer to the stich line. Top of back seat is to the left, top cover is to the right
By the way 67 Dart, OE rear upholstery
20190505_121207.jpg
 
Last edited:
Dana67Dart said:
My top is down so I cant see the hog rings but my mounting strip sets just under the stiching. Closer to your second photo, but even closer to the stich line. Top of back seat is to the left, top cover is to the right
By the way 67 Dart, OE rear upholstery
View attachment 1715330797
Click to expand...

Thanks. That will help. I know hog rings are suppose to be unseen and the interior guy acknowledges that.
 
Last edited:
Dana67Dart said:
My top is down so I cant see the hog rings but my mounting strip sets just under the stiching. Closer to your second photo, but even closer to the stich line. Top of back seat is to the left, top cover is to the right
By the way 67 Dart, OE rear upholstery
View attachment 1715330797
Click to expand...


Can you get me a pic of the entire back of the seat for the rail and also the side corners? Thanks
 
The top is down and won't be gong back up till I replace it. I can take the cover off and get a photo that way.

Post a photo of where you want photo's of and I'll try to accommodate. I noticed that your molding strip (that the dust cover slides into) has a different shape (scratch that it is the same shape)
 
Last edited:
Dana67Dart said:
The top is down and won't be gong back up till I replace it. I can take the cover off and get a photo that way.

Post a photo of where you want photo's of and I'll try to acomodate. I noticed that your molding strip (that the dust cover slides into) has a different shape
Click to expand...
 
You must log in or register to reply here.
-

Back
Top