Is there a source for the cupped washers on the rear shocks? I only need two, the ones with the 1/2" hole in them.
Is there a source for the cupped washers on the rear shocks? I only need two, the ones with the 1/2" hole in them.
I want to make sure the outside diameter is larger than the rubber bushing. It "captures" the shock if the bushing were to fail. I don't think a 1/2 washer is?I f push comes to shove , 1/2 washers and 2 ball peen hammers will work ---------------
Aftermarket is fine. Thanks, I'll PM you!PM me with name/address and I will send you 2 of them free. They're aftermarket not original but will do the job if that's what you need.
I just bought two cheapies, no hardware. "Cheapies" is probably the key word.Shocks used to come with the hardware, not sure if they still do.
I want to make sure the outside diameter is larger than the rubber bushing. It "captures" the shock if the bushing were to fail. I don't think a 1/2 washer is?
Aftermarket is fine. Thanks, I'll PM you!
I just bought two cheapies, no hardware. "Cheapies" is probably the key word.
I went through four big coffee cans of hardware. I found a lot of stuff I didn't know I had, but no shock washers.
And I do see belleville washers on Ebay and McMaster, etc., but you have to buy bulk and I'll probably never need a another!
Okay, I didn't think they'd be big enough. I would try that, but tw7912 is sending me a couple and won't even accept postage. FABO is a great place. Thanks1/2'' i. d. washers have a bigger o.d. than ur shock bushings , I have two on mine ----------
Okay, I didn't think they'd be big enough. I would try that, but tw7912 is sending me a couple and won't even accept postage. FABO is a great place. Thanks