[FOR SALE] Custom A Body Bronze Brake and Clutch Bushings

Mopar Brakes, Steering, Suspension, Tires & Wheels For Sale

Thread Status:
Not open for further replies.
  1. ValiantOne

    ValiantOne FABO Gold Member FABO Gold Member

    Messages:
    1,113
    Likes Received:
    219
    Joined:
    Mar 20, 2008
    Location:
    Communist Maryland
    Local Time:
    4:42 PM
    Contact Seller
    Hey All.

    I finally got back around to turning out more of the Custom Bronze Brake and Clutch Bushings I've been selling here for a few years now.

    Currently I have:
    -Standard A body brake bushing (fits auto and 4sp both, 1963-76) If your brake pivot shaft is .810 in diameter, this is the bushing you need
    -Standard A body clutch bushing (fits 1963-76)

    If anyone is in need of the Heavy Duty set up (brake pivot shaf dia .997) let me know. If we get a few orders together I'll make a batch.

    The prices are $30 per set for the brake bushings (2 pieces) and $25 per set for the clutch bushings (2 pieces), or if you need both brake and clutch it is $55 (4 pieces) + shipping and any Paypal fees.

    I just finished a batch of each and they are ready to ship. Two vids (how they fit & making them) and picture below

    Thanks,

    Chris E., Valiantone
    Williamsport, MD





    brake bushing pic.jpg
     
    Last edited: Jun 23, 2020
    • Like Like x 2
    • moparmat2000

      moparmat2000 FABO Gold Member FABO Gold Member

      Messages:
      17,111
      Likes Received:
      6077
      Joined:
      May 13, 2010
      Location:
      Grand Tetons
      Local Time:
      3:42 PM
      These are the best!!!! I definitely recommend 100% I used these on a 4 speed setup, and they fit absolutely perfectly. Well worth the price.

      20160604_151654.jpeg
       
      • Thanks! Thanks! x 1
      • jonn6464

        jonn6464 1970 Duster

        Messages:
        501
        Likes Received:
        340
        Joined:
        Mar 29, 2017
        Location:
        Weatherford, TX
        Local Time:
        3:42 PM
        Very nice work. I will reach out to you soon.
         
        • Like Like x 1
        • 67dodgedartconv

          67dodgedartconv Well-Known Member

          Messages:
          462
          Likes Received:
          117
          Joined:
          Feb 22, 2011
          Location:
          pass christian, mississippi
          Local Time:
          3:42 PM
          Tried to PM but got an error. I would like a set for the heavy duty clutch/brake pedal.
           
        • ValiantOne

          ValiantOne FABO Gold Member FABO Gold Member

          Messages:
          1,113
          Likes Received:
          219
          Joined:
          Mar 20, 2008
          Location:
          Communist Maryland
          Local Time:
          4:42 PM

          Cool, I'll put you down for a set. If we can get two others, I'll run a batch. I already have the material. Just have to order and cut a mandrel of the right size. These things dirty up the ENTIRE shop, so running them in batches is necessary.

          Dunno why my PM isn't workign......hmmm
           
        • ValiantOne

          ValiantOne FABO Gold Member FABO Gold Member

          Messages:
          1,113
          Likes Received:
          219
          Joined:
          Mar 20, 2008
          Location:
          Communist Maryland
          Local Time:
          4:42 PM
          Okay, we now have two commitments for the HD A body bushes. One more and I'll run the batch.

          Thanks,

          CE
           
        • 67fish383S

          67fish383S FABO Gold Member FABO Gold Member

          Messages:
          264
          Likes Received:
          104
          Joined:
          Jun 16, 2020
          Location:
          Spring Lake, MI
          Local Time:
          4:42 PM
          Looks like exactly what I need, but the Contact Seller button throws an inbox full error. I definitely need a set of clutch bushings for a '67 Barracuda 383 4 speed. I'm thinking I'd do the brake pedal too as long as I have it apart. Please set me up to order a full set if you still have them available. Thanks
           
        • ValiantOne

          ValiantOne FABO Gold Member FABO Gold Member

          Messages:
          1,113
          Likes Received:
          219
          Joined:
          Mar 20, 2008
          Location:
          Communist Maryland
          Local Time:
          4:42 PM

          Sorry! I'll clean up my inbox and send you a note today. Thanks.
           
          • Like Like x 1
          • Crossrammed340

            Crossrammed340 Basin street Blue survivor

            Messages:
            150
            Likes Received:
            48
            Joined:
            Jul 22, 2015
            Location:
            Bradford Ontario Canada
            Local Time:
            4:42 PM
            What size brake and clutch bushings would be standard on a 72 340 4-spd Duster ?.
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            A original 340 car would likely be the 1" HD bushing. I'm making those this week.

            Best,

            CE
             
          • intergalactica

            intergalactica FABO Gold Member FABO Gold Member

            Messages:
            422
            Likes Received:
            43
            Joined:
            Dec 16, 2006
            Local Time:
            4:42 PM

            Would the HD bushing fit in a ‘67 cuda with the 273 Commando engine and an automatic tranny? Couldn’t it serve as an upgrade in comparison to the regular-sized bushing?
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            With the auto trans I'm nearly certain they just used the standard brake bushing. I do have those in stock.
             
          • intergalactica

            intergalactica FABO Gold Member FABO Gold Member

            Messages:
            422
            Likes Received:
            43
            Joined:
            Dec 16, 2006
            Local Time:
            4:42 PM
            In stock? Great! How much and where do I send you the payment? Preferably PayPal.

            By the way, I tried to PM you but your inbox is full.
             
          • ls23h

            ls23h FABO Gold Member FABO Gold Member

            Messages:
            408
            Likes Received:
            1461
            Joined:
            Oct 5, 2009
            Location:
            New York State
            Local Time:
            4:42 PM
            Clean your inbox please
             
          • LovetheA's

            LovetheA's FABO Gold Member FABO Gold Member

            Messages:
            783
            Likes Received:
            113
            Joined:
            Aug 26, 2010
            Location:
            Danbury, CT
            Local Time:
            4:42 PM
            Chris
            I’ll take two sets. One for the clutch pedal and one for the brake pedal. My shipping Carl Kropp 360 Wilson St Fairfield CT 06825. Just pm me the cost with shipping and where to send the PayPal. Thanks
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            Pm'd ya. Thanks!
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            Cleaned. Thanks!

            CE
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            PM Sent. Thanks!
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            ***Update***

            for all you guys who are waiting for the HD .997 ID bushings. I finished a batch yesterday. I sent a pair to Jamie at Passon Performance and he is going to test them on a factory HD pedal set up. I was working from blueprints and just want to make sure they fit properly before I start sending them out. I should hear back from him sometime this coming week.

            Thanks for your patience!

            Best,

            Chris E.
             
          • ValiantOne

            ValiantOne FABO Gold Member FABO Gold Member

            Messages:
            1,113
            Likes Received:
            219
            Joined:
            Mar 20, 2008
            Location:
            Communist Maryland
            Local Time:
            4:42 PM
            Finished HD batch. Yay!!!


            IMG_20200806_135141658.jpg
             
          • mopowers

            mopowers Well-Known Member

            Messages:
            4,918
            Likes Received:
            2005
            Joined:
            Feb 15, 2006
            Location:
            West Sacramento, CA
            Local Time:
            1:42 PM
            Just bought another set of these - this time for my 66 Dart. What a great product! The fit was perfect once I polished a tiny burr off the old pivot pin. I ended up installing a grease fitting too, for good measure. Thanks Chris!

            upload_2020-8-23_16-7-35.png

            upload_2020-8-23_16-8-32.png

            upload_2020-8-23_16-8-50.png

            upload_2020-8-23_16-9-1.png
             
            • Thanks! Thanks! x 1
            • ValiantOne

              ValiantOne FABO Gold Member FABO Gold Member

              Messages:
              1,113
              Likes Received:
              219
              Joined:
              Mar 20, 2008
              Location:
              Communist Maryland
              Local Time:
              4:42 PM
              The grease fitting was a great idea!
               
            Thread Status:
            Not open for further replies.
            1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
              By continuing to use this site, you are consenting to our use of cookies.