Dash that I just bought.

-

moparlee

64 Valiant
Joined
Aug 18, 2004
Messages
1,558
Reaction score
101
Location
Joplin, Mo
What do you guys think of this. I'm not sure I've seen a speedo like this one. Also noticed that the temp gauge and the amp gauge are different. Well different that what I've seen and have.
 

Attachments

  • IMG_3923.jpg
    101.8 KB · Views: 544
  • IMG_3925.JPG
    210 KB · Views: 549
  • IMG_3922.JPG
    100.7 KB · Views: 547
The speedo, temp and Amp gauges are from a 1966 Barracuda.

Ok, thanks...I think that I'm going to try and use that. My heap isn't original anyways and it goes up to 120 instead of 110. I've got a 65 cluster also for more parts. Well, you wouldn't have an extra fuel gauge from a 66 would you. If they fit easy enough in the 64 cluster dish/box or what ever it's called. I'll send them all off to get refurbished. The trip meter is neat feature.
 
I thought I just seen a bunch of 66 gauges on eBay, I bet you could score one there
 
Ok, I got the dash yesterday and got it apart. The 66 stuff was modified greatly.........I probably won't be using that. Which is fine, that wasn't really what I was after. I was after the trim and the piece to left of the cluster.

By the way what's the best way to clean up the aluminum trim?
 

Attachments

  • IMG_7468.JPG
    185.8 KB · Views: 388
  • IMG_7466.jpg
    111.6 KB · Views: 390
  • IMG_7465.JPG
    200.1 KB · Views: 385
  • IMG_7464.JPG
    172.1 KB · Views: 389
  • IMG_7463.JPG
    180.4 KB · Views: 388
  • IMG_7462.JPG
    138.9 KB · Views: 392
  • IMG_7461.JPG
    116.1 KB · Views: 392
This what my dash looks like now. I think that once I send the cluster face and the headlight square off and have the gauges redone. I think it will look good in there. On of these years I would like to put a padded dash in it.
 

Attachments

  • IMG_0235.jpg
    84.5 KB · Views: 385
So, there aren't any early A people here that's redone the trim on there dashes? I cleaned on them some tonight and it looks like there is paint in the groove part. Some it if it come off when I cleaned it. Have you guys repainted that area or did you take all the paint off?
 
I just got the trim put on. I think it looks good. I'm needing to send the square piece off with another cluster bezel to get redone.
 

Attachments

  • IMG_7473.jpg
    89.5 KB · Views: 213
  • IMG_7474.jpg
    84.5 KB · Views: 200
  • IMG_7475.jpg
    96.9 KB · Views: 200
  • IMG_7476.jpg
    70.9 KB · Views: 215
-
Back
Top