Disc brakes on 66 cuda, stud & leaking reservoir

[dschem]

Hello,

i was wondering if anyone had some pictures of what the original stud looks like for the master cylinder on a disc brake 66 cuda. My car has disc brakes with the reservoir adaptor but I do not believe it has the original stud. Does anyone make the gasket that goes between the master cylinder and the reservoir adaptor?

Thanks

Dave

 

[lilcuda]

I have one, but can't get a photo of it right now. I'll try to remember tonight when I get home.

 

[lilcuda]

Here you go.

 

[dschem]

Hello,

Thanks for the picture. That is what I have. I guess I have the right stud then. It sticks up quite a bit.

Thanks

Dave

 

[2 Darts]

Rock Auto has a M/C rebuild kit for $10.72. Check the photo to see if it has it all. Rebuilding your master cylinder is not difficult. In addition to the parts, you'll want some very fine (1500 grit or >) sandpaper to clean the bore out.

Link for Rock Auto http://www.rockauto.com/catalog/raframecatalog.php

 

[dschem]

Hello,

Master cylinder itself works fine. I just was having a leak where the disc brake reservoir adaptor was siting on top of the master cylinder and wondered if anyone makes the seal that goes between the adaptor and the master cylinder.

Thanks

Dave