[WANTED] Driveshaft and radiator for 66 Valiant

[Valiant63]

I need a driveshaft for a 66 Valiant (66 Dart stationwagon) and a good, working slant 6 auto radiator for the same. The closer to central Florida, the better. Oh, I also need a back seat for the station wagon.

 

[65 Dartman]

If you can't find a wagon back seat, a 64-66 Barracuda is pretty much a bolt-in if you have all the seat parts. The only real mod is welding the brackets that secure the seat back locking rod.

 

[SGBARRACUDA]

Do you know the length drive shaft you need?

 

[Lee Robinson]

Do you know the length drive shaft you need?

Do you know the length drive shaft you need?

Do you know the length drive shaft you need?

I have a drive shaft from a 66 Valiant ht., slant 6/904. I also have a rear seat from a 65 Valiant wagon. Unfortunately I'm in Ca.
Shipping for a seat would be a killer. These parts are available to someone closer as well.

 

[whitepunkonnitro]

If you can't find a wagon back seat, a 64-66 Barracuda is pretty much a bolt-in if you have all the seat parts. The only real mod is welding the brackets that secure the seat back locking rod.

I need a driveshaft for a 66 Valiant (66 Dart stationwagon) and a good, working slant 6 auto radiator for the same. The closer to central Florida, the better. Oh, I also need a back seat for the station wagon.

Which transmission/rear combination?

 

[trapster]

I may have what you need, but I need to know what length driveshaft you need.

 

[Valiant63]

Do you know the length drive shaft you need?

Apparently it is 51.61 inches long.

 

[SGBARRACUDA]

Is that center to center of the u-joint caps?

 

[Valiant63]

Is that center to center of the u-joint caps?

Idk, Roy. SlantsixDan gave me the measurements. He says mutliple year Valiants and Scamps will work.

 

[SGBARRACUDA]

Well wouldn't you know it I've got longer and shorter. I'm sure that is C to C on the u-joints. Dan knows his shat.

 

[whitepunkonnitro]

Unfortunately, only 66 Valiants and Barracudas are going to have that exact driveshaft
65-down is B&T, and 67-up is two inches longer.

 

[SGBARRACUDA]

Yeah your probably going to have shorten a longer one.

 

[trapster]

Looks like I have what you need and I am in Winter Springs/ Orlando area.

It is 51.5 inches Center to Center with a 904 slip.

 

[Valiant63]

Looks like I have what you need and I am in Winter Springs/ Orlando area.

It is 51.5 inches Center to Center with a 904 slip.
View attachment 1714952804

Yea! I could remove one from a junk near where I am, but what do you want for yours?