Driveshaft Shop in N.Y.C.?

-

FASTBACK340

Legandary Member
Legendary Member
Joined
Jun 2, 2004
Messages
5,032
Reaction score
40
Me thinks my driveshaft may be out of balance. I get a nasty vibration at about 3,500-4,000 RPM. I have the correct dampener & flywheel on my 360.... new U-joints....scattersheild is aligned.... mounts are good.

Question is, is there a reputable shop out here on Long Island that can balance my shaft? I'm not really looking to have one made unless it's absolutely neccessary.

Thanks guys!
 
Ask Tensec340
(AKA Tim with the 500 Indy headed Dart)

He knows a bunch a "Good fellas" and one is a drive shaft shop owner.
(Um, maybe 2 of them.)
 
Is there an Associated Truck Parts near you????? They have shortened one and made me 2 new driveshafts. Never had a problem. They did my trunion to slip conversion for me if anyone is looking to have that done...

Bob
 
How about these guys.

Universal Joint Sales Co Inc. ... Syracuse, NY 13204-1241. 1 315 475-7241

I think they're still in business.
 
There's also Nassau Drive Shaft in Merrick,NY 1-516-867-3680
That's on the Island I think.
 
That's the one I couldn't think of earlier. SO I clled Tensec340 (Tim) and that is who he use's. There in Merrick, just passed the Meadowbrook Pkwy, south of Sunrise next door to Colvin Auto Parts on the East side of the road, Babylon Tnpke.
 
Yes ,I have had many made by them and all were perfect. Bob is a good guy and he'll get you done real fast.......... Nassau Drive Shaft in Merrick
 
I have used these guys for years. Exit 57 off the LIE.

Drive Shaft Shop Inc. 208 Blydenburg Rd 11749-5023 Islandia, SUFFOLK (NY) Contacts: Phone 6313481818. Fax 6313481844
 
Thanks for all the responses guys! Rob called me yesterday at work to let me know about Nassau Drive Shaft after he spoke with Tim. They'll get the call later today. Thanks again Rob!

After enjoying about 300 miles of cruising, I'm pulling her (partially...) apart. I need to change my fan shroud & crank balancer, remove the driveshaft, pull the shifter so I can rebuild it, and install my TTI system.

And we do this why? :angry7:
 
I have used these guys for years. Exit 57 off the LIE.

Drive Shaft Shop Inc. 208 Blydenburg Rd 11749-5023 Islandia, SUFFOLK (NY) Contacts: Phone 6313481818. Fax 6313481844

They did my Duster's D-shaft shortening. 1 day turn around. Nice fella's.

Thanks for all the responses guys! Rob called me yesterday at work to let me know about Nassau Drive Shaft after he spoke with Tim. They'll get the call later today. Thanks again Rob!

After enjoying about 300 miles of cruising, I'm pulling her (partially...) apart. I need to change my fan shroud & crank balancer, remove the driveshaft, pull the shifter so I can rebuild it, and install my TTI system.

And we do this why? :angry7:

No problem my man, no problem. I had time. Bennifit of workin nights. Thank Tim for the answer. Considering I lived in Freeport for a little while, I just couldn't remember the place. It was right there in the corner of my mind and I just couldn't see it.
(What else is new, LOL.)
 
-
Back
Top