[WANTED] driveshaft

[stoneypoint340]

need a driveshaft for a 1972 duster with a 904 trans and a 8 1/4 rear end. let me know whats out there or do i have to get one made . thanks

 

[jos51700]

Grab one for a late model Crown Vic and get it shortened?

 

[DOHCeclipse]

I have the one from my 72 with a 904 but it had a 7 1/4 rear so I'm sure you would have to change the yoke on rear side of the shaft..unless there's a conversion u joint out there for it

 

[Moparparts]

I have one here from a 73 Dart Sport with a 340 4-speed and an 8 1/4. It is a large 3.25 diameter tube with 7260 ends if it will work and your interested PM me

 

[stoneypoint340]

pm sent

 

[Moparparts]

PM returned

pm sent

 

[Dustert73]

I have one for a 904 and 7.25 rear as well. You will need to have it shortened (1.25 inch from what I remember). You don't have to mess with different size u-joints on this. Although it is a good time to replace them with new ones. Pm if interested

 

[halifaxhops]

I have a complete one from a 74 se 904 and 8 1/4 rear, went another rout.