[SOLD] Dual exhaust system "Yoke" back 1.5" for a 1963 Dodge 440 Wagon B body

-
Status
Not open for further replies.

69FBCuda

Stand back 10' for your viewing pleasure & Safety
Joined
Aug 28, 2014
Messages
4,516
Reaction score
2,197
Location
Florida
Rating - 100%
25   0   0
Contact seller
Dual exhaust system "Yoke" back 1.5" for a 1963 Dodge 440 Wagon B body with small block yokes(3.25 hole CL to CL)

1.5" dual exhaust manifold to tips, mufflers(612212) with H-pipe crossover 3 sections each side, has Cherry Bomb mufflers. You will need to either weld or band clamp(5 total) should be pretty easy to align the cuts so you could do the welding on the ground. I can provide the measurements for point A to point B that you need. Look to be mandrel bent? I received this with other parts purchased and am charging $25 for the part what I feel is my time and effort to get this to you. I think shipping will be around $100 due to the length. I am willing to drive up to 75 miles one way for $100 which would include the exhaust also.

Cherry Bomb 3.5 in CASE X 22 in - 2 in - BLK
Cherry Bomb 612212: 3.5 in CASE X 22 in - 2 in - BLK | JEGS

Listed in another post is a Leaf spring set for 1963 Dodge 440 Wagon B body, this can be combine for the additional $25 price and travel will remain the same. For $125 you can get the exhaust and leafs delivered up to 75 miles(less for closer).

https://www.forabodiesonly.com/mopar/threads/leaf-spring-set-for-1963-dodge-440-wagon-b-body.436257/

Priority should go to the member requesting both items.

Located in Osteen Florida 32764

Info
73" longest section
50# +/-
16" across +/-
Chrome tips, light rust

Plus shipping, Paypal accepted-buyer pays fees if any
Thanks FABO

IMG_20190516_160753.jpg


IMG_20190516_160803.jpg


IMG_20190516_160813.jpg


IMG_20190516_160829.jpg


IMG_20190516_160839.jpg


IMG_20190516_160846.jpg


IMG_20190516_160852.jpg


IMG_20190516_160858.jpg


IMG_20190516_160905.jpg


IMG_20190516_161207.jpg
 
Last edited:
Status
Not open for further replies.
-
Back
Top