Duster quarter glass

[416 mopar]

I have a 72 duster and I'm trying to remove the old glass out of the gasket and metal trim but it won't come out ?? Any tips on how I can remove the glass out of the trim. Also any tips on how to install the glass I had purchased AMD tinted glass in the summer with new gaskets but tips would be very helpful I have never done this before!!
Thanks
Nick

 

[blue missile]

Nick,
on the original Missile (73) the quarter glass was slotted by the factory and just slid out once you unscrewed the latch.
However that was an exception.
In order to change out the glass you will have to remove the frame from the car. one screw is behind the sail panel and the other is behind the side panel under the window.
You then have to drill out the rivet at either the top or bottom of the vertical track. This allows you to slide out the old window, swap out the pins and reverse the procedure for the install.
Andrew

 

[70Duster440]

Blue is correct. Full disassembly is required. I have a few pics if you scroll down this page: http://70duster440.com/misc.html