Duster spoiler pics wanted not go-wing

player1up · Jul 17, 2008

Ok I'm looking for a few pictures of the direct connection spoiler (not go-wing) that was made for the duster/dart sport. Similar to the one from the DustAAR. I know someone has a few ;)

I'm putting in the one from the DustAAR, I know that the original ones have the mounting holes on the outside not the underside.

BigStrok3 · Jul 17, 2008

Thats a sweet looking spoiler. Where can thoes be bought at? I was going to go with the go wing but everyone has one.

rebeldart · Jul 17, 2008

Matt - where'd you find the spoiler ?

player1up · Jul 17, 2008

WELL..... the pic is from the Dustaar that Rodney Chapman had built....... but (don't want to let the cat out of the bag) I've been in contact with AAR fiberglass and they want some pictures of how it mounts...the told me that they have a mold but have not produced any yet! Quote from email they sent me "Yes I already have it done but never made one out of the mold ". So we might see one in the near future :cheers:
BigStrok3, I agree, and the wing doesn't fit the look I'm going for....

I think I'll "volunteer" my duster to be the test fit.... I'll let them drill holes if I can have one.

Check out
http://dustaar.com/
then click the "build" link at the top....tons of pics

SRT_DSTRHOLC · Jul 17, 2008

ill take one if its not 432432532 dollars

player1up · Jul 17, 2008

We'll see, I haven't asked for a price yet...kinda scared to...

ramcharger · Jul 17, 2008

Hmmm....Interesting concept. From an aerodynamic point of view that spolier is probably just the right height. No way to know for sure without a wind tunnel. From a styling point of veiw I'd like to see one maybe an 1.5" shorter or angled to the rear a bit more.

Just my 2 cents.

mrspeeddemon · Jul 18, 2008

call MAS racing products they have them for like 60 bucks (651-644-6811)
I have one, it the outside holes just like the old direct connection one. I haven't put it on yet put I clamped it on to see what it looks like. sorry about the crappy pictures they're from my phone

BigStrok3 · Jul 18, 2008

mrspeeddemon said:
call MAS racing products they have them for like 60 bucks (651-644-6811)
I have one, it the outside holes just like the old direct connection one. I haven't put it on yet put I clamped it on to see what it looks like. sorry about the crappy pictures they're from my phone

Looks good other than it looks like it is buldging in the middle of the trunk lid where the body like is other than that it looks good. I might look into that one does it seem to be a durable piece?

player1up · Jul 18, 2008

Woo hoo to mr speed demon :cheers: I've been looking for one and haven't been able to find anything. AND Mas doesn't list it on their website..I've been there tons of times and have never seen it. Maybe item MAS 1671? but no pic

So, mrspeeddemon, That piece is not flat across the front is it, it has like a point (ridge) in the middle from the mounting face to the point?
...and for $60..what a deal

1970duster360 · Jul 18, 2008

kinda looks like a early camaro spoiler
any one ever measure one up?
mike

HawaiiDuster · Jul 19, 2008

I got one of the originals still in the box, but its still sitting in Hawaii so it'd be kind of hard taking a picture of it since I'm in Vegas.

mrspeeddemon · Jul 19, 2008

it is bulging a little in the middle but I only had 2 little c-clamps holing it on in the pics.but it does flatten out really nice. And as for quality I qould take the quality of this piece over the quallity of my $500+shipping hood from US body.I'm thinking about grabbing an extra trunk lid of my parts car and install it on that lid so don't hurt the original Dart Lite trunk- and I could switch from winged to wingless as I feel like it.

ramcharger · Jul 19, 2008

mrspeeddemon said:
it is bulging a little in the middle but I only had 2 little c-clamps holing it on in the pics.but it does flatten out really nice. And as for quality I qould take the quality of this piece over the quallity of my $500+shipping hood from US body.I'm thinking about grabbing an extra trunk lid of my parts car and install it on that lid so don't hurt the original Dart Lite trunk- and I could switch from winged to wingless as I feel like it.

I like the height and rake of that spoiler.

SRT_DSTRHOLC · Jul 19, 2008

really??? I like my us body hood on my duster

dilley340 · Jul 20, 2008

I tried contacting AAR Fiberglass about 5-6 years ago to see if they would use my NOS rear spoiler for a mold. I didn't get a reply back from them, so I guess they weren't interested. I purchased the front and rear bumpers for my '73 Duster from them and they are perfect.

Here's a couple of pix of the spoiler...

SRT_DSTRHOLC · Jul 20, 2008

wanna sell? haha

mydaytona43 · Sep 12, 2010

I have an NOS on I will sell you!!!

Oldmanmopar · Nov 23, 2019

The last two pics are of the front spoiler. I believe they came together in one box. the reason for the two parts numbers . I don't remember if they did.