[Found!] Early a body steering column bracket for manual trans

[mycuda]

The one that goes around the actual steering column tube w gasket that bolts to the clutch pedal plate bracket which bolts to the firewall.

Otherwise I can fabricate the automatic steering column bracket i have to get it to work but rather not.

Thanks, Dave

 

[65 Dartman]

Hey Dave - I’ll see if I have an extra and if so will still be on the column. To remove/install it to the column the wiring for the turn signal switch needs to be at a minimum inside the column so the plate will slide down the column. My automatic 65 Dart uses the same 2 piece design FWIW.

 

[mycuda]

Thanks Don.
Send pics if possible but I know you know what I need.....


Dave

 

[mycuda]

Any luck on the bracket I don't care if you cut a slit in it and get it off thanks

 

[65 Dartman]

Here is a pic I just took of said plate which is still on the Barracuda steering column

 

[mycuda]

Thanks for pic.Have a couple of choices of separated brackets one locally.
Waiting for pics. Keep you informed

Thanks, Dave

 

[65 Dartman]

No Problem